Install before you trust the numbers
Isolate the line, fit the specified couplings, and zero after fill. Wrong orientation or air in the line will decode cleanly and still be wrong.
Paste this profile only onto PS-260 hardware. Pressure and leak payloads use different fields.
Commissioning checklist
Join with OTAA, paste the PS-260 flow codec, and confirm engineering-unit flow against a known pump run or certified meter. Record pipe diameter, orientation, zero check, and DevEUI. Document the unit on the datasheet in the commissioning pack.
Install per pipe-full and straight-run guidance on the datasheet. Air pockets and partially filled pipes decode cleanly and still mislead the process team.
Limits and related kits
PS-260 is inline flow, not leak detection or tank level. Rope and spot kits cover external wet events; PS-240 covers vessel height. Pressure on the same header uses PS-270 with its own decoder.
Industrial solution pages outline pipe monitoring patterns. Order from the PS-260 product page; keep ChirpStack and TTN codecs model-specific.
Integration notes
Trend flow with battery_mv and fcnt on the same card so silent nodes are obvious. Alarm on rate-of-change and absolute limits separately — a stuck last value with a frozen fcnt is a radio fault, not a steady process.
When pairing with PS-270 on the same header, use two device profiles. Document pipe schedule and gasket materials in the pack for maintenance crews.
Named fields
| Field | Type | Notes |
|---|---|---|
| flow | number | Flow rate in datasheet units after install |
| totaliser | number | Optional accumulated volume when enabled |
| battery_mv | integer | Battery millivolts |
| fcnt | integer | Frame counter |
Example after decode
{
"flow": 12.4,
"totaliser": 1840.2,
"battery_mv": 3180,
"fcnt": 201
}Byte offsets live in the decoder file shipped with the kit. If the first uplink disagrees with this example, trust the shipment file and the factory functional-test record.
Related pages
FAQ
Is this legal for custody transfer?
Only if your quote explicitly includes a certified accuracy class. Most stock kits are for trend and allocation.
Can I reuse a pressure decoder?
No. Flow and pressure are separate profiles on the same application.
What unit is flow?
The unit on the quoted datasheet. Record it in the commissioning pack.
Where is the industrial solution page?
The industrial sensing page describes how flow, pressure, and leak share one gateway.
Which flow unit appears after decode?
The engineering unit on the datasheet after commissioning. Do not assume litres per minute unless the quote says so.
Can I trend bidirectional flow?
Only if the kit firmware and decoder expose direction or signed flow. Confirm on the shipment codec.
Does PS-260 replace a custody-transfer meter?
No. It is industrial process telemetry. Metrology-grade custody transfer needs certified instruments.