Guide

Sensing System Design: Parameter to Probe to Backhaul

Design industrial sensing systems measurement-first: choose the parameter and probe, then the interface (Modbus/SDI-12), then optional LoRaWAN backhaul.

1. Define the measurement

Write the parameter, engineering unit, and duty cycle before you open a catalog. Turbidity for an outfall, volumetric water content at root depth, and wind for a mast boom are different instruments—even when they share a brand.

Capture environment constraints: immersion, fouling, temperature, power availability, and whether operators can visit for calibration.

2. Select the sensing element

Browse the sensing technologies catalog by domain: water & hydrology, weather & radiation, or soil & crop. Prefer parameter-specific probes with published status (Available, Configurable, In development) and OEM price bands.

Confirm the interface your platform already supports—Modbus RTU, SDI-12, RS-485, or 4–20 mA—before inventing a new radio path.

3. Choose integration

Your logger or RTU: cable the probe to an existing master and keep radio out of the critical path.

Unified probe bus: keep multiple elements on one field interface for maintenance simplicity.

Optional LoRaWAN kit: use a decoder-ready PS kit when coverage and battery life beat copper, and when named payload fields matter more than raw hex.

4. Commission and document

Record model, serial/lot, calibration date, install location, and the first verified reading against a reference. For LoRaWAN kits, add DevEUI, JoinEUI custody, and decoder version.

Sensors report process and environmental data; they do not replace regulatory compliance procedures.

FAQ

Should I start with LoRaWAN or with the probe?

Start with the measurement. Select the probe or sonde that matches the parameter and environment, then decide whether your logger, Modbus master, or a LoRaWAN kit carries the data.

When is a LoRaWAN kit the right choice?

When you want a turnkey wireless edge node with a documented decoder and do not already have a field logger or RTU for that measurement.

Can I mix probes and LoRaWAN kits on one site?

Yes. Many sites use Modbus sondes on a logger for water quality while using LoRaWAN kits for leak or weather nodes that need sparse coverage.